<?xml version="1.0"?>
<!-- Created with ExoImplantEditor [Version 4909] -->
<ImplantLibraryEntry xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
  <RegistrationClickCenter>
    <x>0</x>
    <y>0</y>
    <z>0</z>
  </RegistrationClickCenter>
  <AxisAsymmetric>
    <x>0</x>
    <y>1</y>
    <z>0</z>
  </AxisAsymmetric>
  <DisplayInformation>TI-BASE BELL(GEO) ME-DENT</DisplayInformation>
  <IsWithInterface>true</IsWithInterface>
  <IsWithRotationLock>true</IsWithRotationLock>
  <SupportOrientation>-1</SupportOrientation>
  <WarrantyInformation>DISCLAIMER OF WARRANTY


THIS DATA IS PROVIDED "AS IS" AND WITHOUT WARRANTIES AS TO PERFORMANCE, ACCURACY, OR MERCHANTABILITY. THE SELLER'S SALESPERSONS MAY HAVE MADE STATEMENTS ABOUT THIS DATA. ANY SUCH STATEMENTS DO NOT CONSTITUTE WARRANTIES AND SHALL NOT BE RELIED ON BY USER IN DECIDING WHETHER TO USE THIS DATA.

THIS DATA IS PROVIDED WITHOUT ANY EXPRESSED OR IMPLIED WARRANTIES WHATSOEVER. BECAUSE OF THE DIVERSITY OF CONDITIONS AND HARDWARE UNDER WHICH THIS DATA MAY BE USED, NO WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS OFFERED. THE USER IS ADVISED TO TEST THE DATA THOROUGHLY BEFORE RELYING ON IT. THE USER MUST ASSUME THE ENTIRE RISK OF USING THIS DATA AND ACCEPTS IT "WITH ALL ITS FAULTS". THE USER MUST ASSUME THE ENTIRE RISK OF USING THE PROGRAM.
</WarrantyInformation>
  <AxisOcclusal>
    <x>0</x>
    <y>0</y>
    <z>1</z>
  </AxisOcclusal>
  <TypeConfig>
    <ImplantTypeConfig>
      <ScrewFilename>SCREW_OSSTEM_MINI_EXO_CAD.STL</ScrewFilename>
      <ImplantFilename>ANALOG_OSSTEM_MINI_EXO_CAD.STL</ImplantFilename>
      <DisplayInformation>GAMMA MINI</DisplayInformation>
      <Keyword>GAMMAMINI</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00017160270363092423</y>
            <z>10.469431877136231</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL-SUM20-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL-SUM20-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0</DisplayInformation>
          <Keyword>FULLGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00088283512741327286</y>
            <z>10.471590042114258</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0</DisplayInformation>
          <Keyword>BRIDGEGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00090148299932479858</y>
            <z>10.469441413879395</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3</DisplayInformation>
          <Keyword>FULLGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00088283512741327286</y>
            <z>10.471590042114258</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3</DisplayInformation>
          <Keyword>BRIDGEGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00014585256576538086</y>
            <z>10.473513603210449</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL-SUM20-H__short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL-SUM20-H__short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 SHORT</DisplayInformation>
          <Keyword>FULLGH20SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00027197599411010742</y>
            <z>10.470914840698242</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH20SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00012618303298950195</y>
            <z>10.470603942871094</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 SHORT</DisplayInformation>
          <Keyword>FULLGH13SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00012618303298950195</y>
            <z>10.470603942871094</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_M_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-N_short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-N_short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH13SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.00052857398986816406</y>
            <z>7.1486592292785645</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL-SUM20-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL-SUM20-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 V2/V3</DisplayInformation>
          <Keyword>FULLGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0015628337860107422</y>
            <z>7.1494693756103516</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0030701160430908203</y>
            <z>7.150942325592041</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 V2/V3</DisplayInformation>
          <Keyword>FULLGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0014474391937255859</y>
            <z>7.15073299407959</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0020518302917480469</y>
            <z>7.1576533317565918</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL-SUM20-H__short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL-SUM20-H__short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH20SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0023655891418457031</y>
            <z>7.1542930603027344</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.Bridge.GEO.LL2-SUM20-N_short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH20SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00096392631530761719</y>
            <z>7.1533002853393555</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH13SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0040762424468994141</y>
            <z>7.142855167388916</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>Scan.Osstem.Mini.V3_ExoCad.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Mini.GEO.LL2-SUM13-N_short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Mini.GEO.LL2-SUM13-N_short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH13SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <ScrewFilename>SCREW_OSSTEM_REGULAR_V5_exocad.STL</ScrewFilename>
      <ImplantFilename>ANALOG_OSSTEM_REG_EXOCAD.STL</ImplantFilename>
      <DisplayInformation>GAMMA REGULAR</DisplayInformation>
      <Keyword>GAMMAREGULAR</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-2.288818359375E-05</y>
            <z>10.45014762878418</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Geo.LL2-SURO20-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Geo.LL2-SURO20-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0</DisplayInformation>
          <Keyword>FULLGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>5.14984130859375E-05</y>
            <z>10.450225830078125</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL2-SURO20-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL2-SURO20-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0</DisplayInformation>
          <Keyword>BRIDGEGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>5.340576171875E-05</y>
            <z>10.450149536132813</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH3.0</DisplayInformation>
          <Keyword>FULLGH30</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-2.574920654296875E-05</y>
            <z>10.450223922729492</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH3.0</DisplayInformation>
          <Keyword>BRIDGEGH30</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.0004558563232421875</y>
            <z>10.448971748352051</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO_GEO_OSSTEM_LL2-SURO13-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO_GEO_OSSTEM_LL2-SURO13-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3</DisplayInformation>
          <Keyword>FULLGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00087773799896240234</y>
            <z>10.451875686645508</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3</DisplayInformation>
          <Keyword>BRIDGEGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00069659948348999023</y>
            <z>10.451029777526856</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Geo.LL2-SURO20-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Geo.LL2-SURO20-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 SHORT</DisplayInformation>
          <Keyword>FULLGH20SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00058263540267944336</y>
            <z>10.450942993164063</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL2-SURO20-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL2-SURO20-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH20SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00027823448181152344</y>
            <z>10.450083732604981</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-H_short_exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-H_short_exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH3.0 SHORT</DisplayInformation>
          <Keyword>FULLGH30SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.001010894775390625</y>
            <z>10.449062347412109</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH3.0 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH30SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.0001354217529296875</y>
            <z>10.449851036071777</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Full.GEO.LL2-SURO13-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Full.GEO.LL2-SURO13-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 SHORT</DisplayInformation>
          <Keyword>FULLGH13SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00042676925659179688</y>
            <z>10.449807167053223</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH13SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.00072294473648071289</y>
            <z>7.1447772979736328</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Geo.LL2-SURO20-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Geo.LL2-SURO20-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 V2/V3</DisplayInformation>
          <Keyword>FULLGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0013742446899414063</y>
            <z>7.1579012870788574</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL2-SURO20-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL2-SURO20-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0039712190628051758</y>
            <z>7.159660816192627</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH3.0 V2/V3</DisplayInformation>
          <Keyword>FULLGH30V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0014070272445678711</y>
            <z>7.16030216217041</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH3.0 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH30V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.022531509399414062</y>
            <z>7.159827709197998</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO_GEO_OSSTEM_LL2-SURO13-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO_GEO_OSSTEM_LL2-SURO13-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 V2/V3</DisplayInformation>
          <Keyword>FULLGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00046825408935546875</y>
            <z>7.1496586799621582</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0090031623840332031</y>
            <z>7.1576657295227051</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Geo.LL2-SURO20-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Geo.LL2-SURO20-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH20SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0032763481140136719</y>
            <z>7.155726432800293</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL2-SURO20-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL2-SURO20-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH20SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00060224533081054688</y>
            <z>7.1514372825622559</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-H_short_exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-H_short_exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH3.0 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH30SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.002994537353515625</y>
            <z>7.1447920799255371</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH3.0 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH30SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0058474540710449219</y>
            <z>7.1524505615234375</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Full.GEO.LL2-SURO13-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Full.GEO.LL2-SURO13-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH13SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00056934356689453125</y>
            <z>7.1560893058776855</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH13SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <ScrewFilename>SCREW_ASTRA_3.5_ORIGINAL_EXOCAD.STL</ScrewFilename>
      <ImplantFilename>ANALOG_ASTRA_3.5_EXOCAD.STL</ImplantFilename>
      <DisplayInformation>DELTA MINI</DisplayInformation>
      <Keyword>DELTAMINI</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00455784797668457</y>
            <z>10.663668632507324</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_ASTRA_3.5_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.GEO.LL2-ASR-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.GEO.LL2-ASR-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3</DisplayInformation>
          <Keyword>FULLGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0015859603881835938</y>
            <z>7.1495862007141113</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Astra.35.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.GEO.LL2-ASR-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.GEO.LL2-ASR-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 V2/V3</DisplayInformation>
          <Keyword>FULLGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.0013260841369628906</y>
            <z>10.663483619689941</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_ASTRA_3.5_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.GEO.LL2-ASR-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.GEO.LL2-ASR-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 SHORT </DisplayInformation>
          <Keyword>FULLGH13SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.00022625923156738281</y>
            <z>7.1503505706787109</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Astra.35.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.GEO.LL2-ASR-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.GEO.LL2-ASR-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH13SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.0054686069488525391</y>
            <z>10.665522575378418</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_ASTRA_3.5_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.GEO.LL2-ASR20-H2_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.GEO.LL2-ASR20-H2_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0</DisplayInformation>
          <Keyword>FULLGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00036144256591796875</y>
            <z>7.1506843566894531</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Astra.35.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.GEO.LL2-ASR20-H2_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.GEO.LL2-ASR20-H2_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 V2/V3</DisplayInformation>
          <Keyword>FULLGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00030589103698730469</y>
            <z>10.665249824523926</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_ASTRA_3.5_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.GEO.LL2-ASR20-H2_SHORT_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.GEO.LL2-ASR20-H2_SHORT_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 SHORT</DisplayInformation>
          <Keyword>FULLGH20SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.000335693359375</y>
            <z>7.1497688293457031</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Astra.35.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.GEO.LL2-ASR20-H2_SHORT_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.GEO.LL2-ASR20-H2_SHORT_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH20SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00024247169494628906</y>
            <z>10.664610862731934</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_ASTRA_3.5_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.Bridge.GEO.LL2-ASR-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.Bridge.GEO.LL2-ASR-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3</DisplayInformation>
          <Keyword>BRIDGEGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0014870166778564453</y>
            <z>7.1530442237854</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Astra.35.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.Bridge.GEO.LL2-ASR-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.Bridge.GEO.LL2-ASR-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.0011985301971435547</y>
            <z>10.666942596435547</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_ASTRA_3.5_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.Bridge.GEO.LL2-ASR-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.Bridge.GEO.LL2-ASR-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH13SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.00037503242492675781</y>
            <z>7.150723934173584</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Astra.35.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.Bridge.GEO.LL2-ASR-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.Bridge.GEO.LL2-ASR-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH13SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00023436546325683594</y>
            <z>10.667153358459473</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_ASTRA_3.5_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.GEO.LL2-ASR20-N2_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.GEO.LL2-ASR20-N2_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0</DisplayInformation>
          <Keyword>BRIDGEGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0017578601837158203</y>
            <z>7.1498284339904785</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Astra.35.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.GEO.LL2-ASR20-N2_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.GEO.LL2-ASR20-N2_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.0011160373687744141</y>
            <z>10.665870666503906</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_ASTRA_3.5_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.GEO.LL2-ASR20-N2_Short_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.GEO.LL2-ASR20-N2_Short_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH20SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0014822483062744141</y>
            <z>7.1491966247558594</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Astra.35.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Astra.35.GEO.LL2-ASR20-N2_Short_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Astra.35.GEO.LL2-ASR20-N2_Short_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH20SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <ScrewFilename>SCREW_OSSTEM_REGULAR_V5_exocad.STL</ScrewFilename>
      <ImplantFilename>ANALOG_OSSTEM_REG_EXOCAD.STL</ImplantFilename>
      <DisplayInformation>DELTA REGULAR</DisplayInformation>
      <Keyword>DELTAREGULAR</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.0016994476318359375</y>
            <z>10.451876640319824</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO_GEO_OSSTEM_LL2-SURO13-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO_GEO_OSSTEM_LL2-SURO13-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3</DisplayInformation>
          <Keyword>FULLGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.001041412353515625</y>
            <z>7.1511378288269043</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO_GEO_OSSTEM_LL2-SURO13-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO_GEO_OSSTEM_LL2-SURO13-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 V2/V3</DisplayInformation>
          <Keyword>FULLGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>5.5551528930664062E-05</y>
            <z>10.450586318969727</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Full.GEO.LL2-SURO13-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Full.GEO.LL2-SURO13-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 SHORT</DisplayInformation>
          <Keyword>FULLGH13SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.00086617469787597656</y>
            <z>7.1470503807067871</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Full.GEO.LL2-SURO13-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Full.GEO.LL2-SURO13-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH13SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.0013155937194824219</y>
            <z>10.4522123336792</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Geo.LL2-SURO20-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Geo.LL2-SURO20-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0</DisplayInformation>
          <Keyword>FULLGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>1.0251998901367188E-05</y>
            <z>7.1511425971984863</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Geo.LL2-SURO20-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Geo.LL2-SURO20-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 V2/V3</DisplayInformation>
          <Keyword>FULLGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.0015585422515869141</y>
            <z>10.449236869812012</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Geo.LL2-SURO20-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Geo.LL2-SURO20-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 SHORT</DisplayInformation>
          <Keyword>FULLGH20SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0019462108612060547</y>
            <z>7.1466593742370605</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Geo.LL2-SURO20-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Geo.LL2-SURO20-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH20SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>7.534027099609375E-05</y>
            <z>10.454045295715332</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH3.0</DisplayInformation>
          <Keyword>FULLGH30</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0013251304626464844</y>
            <z>7.1515746116638184</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH3.0 V2/V3</DisplayInformation>
          <Keyword>FULLGH30V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00026535987854003906</y>
            <z>10.45074462890625</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-H_short_exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-H_short_exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH3.0 SHORT</DisplayInformation>
          <Keyword>FULLGH30SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0010087490081787109</y>
            <z>7.15018892288208</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-H_short_exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-H_short_exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH3.0 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH30SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00029850006103515625</y>
            <z>10.452028274536133</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3</DisplayInformation>
          <Keyword>BRIDGEGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00037360191345214844</y>
            <z>7.1499099731445312</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00014853477478027344</y>
            <z>10.450850486755371</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH13SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.00029540061950683594</y>
            <z>7.1496400833129883</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.Bridge.GEO.LL2-SURO13-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH13SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.0013642311096191406</y>
            <z>10.450700759887695</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL2-SURO20-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL2-SURO20-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0</DisplayInformation>
          <Keyword>BRIDGEGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0052142143249511719</y>
            <z>7.1476316452026367</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL2-SURO20-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL2-SURO20-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.0011491775512695313</y>
            <z>10.450507164001465</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL2-SURO20-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL2-SURO20-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH20SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0009822845458984375</y>
            <z>7.1519980430603027</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL2-SURO20-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL2-SURO20-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH20SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.0014064311981201172</y>
            <z>10.454404830932617</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH3.0</DisplayInformation>
          <Keyword>BRIDGEGH30</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.00058650970458984375</y>
            <z>7.1505908966064453</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-N_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-N_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH3.0 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH30V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00025296211242675781</y>
            <z>10.451200485229492</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_OSSTEM_REGULAR_exocad_new.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH3.0 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH30SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0042893886566162109</y>
            <z>7.1494941711425781</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Osstem.Regular.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Osstem.Regular.GEO.LL-SURO30-N_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Osstem.Regular.GEO.LL-SURO30-N_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH3.0 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH30SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
    <ImplantTypeConfig>
      <ScrewFilename>SCREW_IMPRO_V5_EXO_CAD.STL</ScrewFilename>
      <ImplantFilename>ANALOG_IMPRO_EXO_CAD.STL</ImplantFilename>
      <DisplayInformation>ALPHA</DisplayInformation>
      <Keyword>ALPHA</Keyword>
      <SubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00094079971313476562</y>
            <z>10.863028526306152</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_IMPRO_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Full.GEO.LL2-DER13-H_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Full.GEO.LL2-DER13-H_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3</DisplayInformation>
          <Keyword>FULLGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0011544227600097656</y>
            <z>7.1514067649841309</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Implantium.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Full.GEO.LL2-DER13-H_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Full.GEO.LL2-DER13-H_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 V2/V3</DisplayInformation>
          <Keyword>FULLGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00059151649475097656</y>
            <z>10.863637924194336</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_IMPRO_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Full.GEO.LL2-DER13-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Full.GEO.LL2-DER13-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 SHORT</DisplayInformation>
          <Keyword>FULLGH13SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.00089120864868164062</y>
            <z>7.1489086151123047</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Implantium.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Full.GEO.LL2-DER13-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Full.GEO.LL2-DER13-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH1.3 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH13SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00010061264038085938</y>
            <z>10.863262176513672</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_IMPRO_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Full.GEO.LL2-DER20-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Full.GEO.LL2-DER20-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0</DisplayInformation>
          <Keyword>FULLGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00067830085754394531</y>
            <z>7.1499795913696289</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Implantium.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Full.GEO.LL2-DER20-H_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Full.GEO.LL2-DER20-H_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 V2/V3</DisplayInformation>
          <Keyword>FULLGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.0024595260620117188</y>
            <z>10.864882469177246</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_IMPRO_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Full.GEO.LL2-DER20-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Full.GEO.LL2-DER20-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 SHORT</DisplayInformation>
          <Keyword>FULLGH20SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00031423568725585938</y>
            <z>7.14874792098999</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Implantium.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Full.GEO.LL2-DER20-H_Short_Exocad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Full.GEO.LL2-DER20-H_Short_Exocad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH2.0 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH20SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.0060281753540039062</y>
            <z>10.869264602661133</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_IMPRO_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Full.GEO.LL2-DER30-H_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Full.GEO.LL2-DER30-H_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH3.0</DisplayInformation>
          <Keyword>FULLGH30</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.0016243457794189453</y>
            <z>7.1504459381103516</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Implantium.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Full.GEO.LL2-DER30-H_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Full.GEO.LL2-DER30-H_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH3.0 V2/V3</DisplayInformation>
          <Keyword>FULLGH30V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00044393539428710938</y>
            <z>10.864910125732422</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_IMPRO_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Full.GEO.LL2-DER30-H_Short_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Full.GEO.LL2-DER30-H_Short_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH3.0 SHORT</DisplayInformation>
          <Keyword>FULLGH30SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00026774406433105469</y>
            <z>7.1505169868469238</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Implantium.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Full.GEO.LL2-DER30-H_Short_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Full.GEO.LL2-DER30-H_Short_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>FULL GH3.0 SHORT V2/V3</DisplayInformation>
          <Keyword>FULLGH30SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.0022416114807128906</y>
            <z>10.860260009765625</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_IMPRO_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.GEO.LL-DER13-N_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.GEO.LL-DER13-N_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3</DisplayInformation>
          <Keyword>BRIDGEGH13</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.00048065185546875</y>
            <z>7.1486845016479492</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Implantium.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.GEO.LL-DER13-N_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.GEO.LL-DER13-N_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH13V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00031185150146484375</y>
            <z>10.863938331604004</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_IMPRO_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.GEO.LL-DER13-N_Short_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.GEO.LL-DER13-N_Short_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH13SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00013113021850585938</y>
            <z>7.1499752998352051</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Implantium.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.GEO.LL-DER13-N_Short_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.GEO.LL-DER13-N_Short_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH1.3 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH13SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00071215629577636719</y>
            <z>10.865700721740723</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_IMPRO_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Bridge.GEO.LL-DER20-N_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Bridge.GEO.LL-DER20-N_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0</DisplayInformation>
          <Keyword>BRIDGEGH20</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00025439262390136719</y>
            <z>7.1497502326965332</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Implantium.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Bridge.GEO.LL-DER20-N_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Bridge.GEO.LL-DER20-N_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH20V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00052332878112792969</y>
            <z>10.864561080932617</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_IMPRO_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Bridge.GEO.LL-DER20-N_SHORT_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Bridge.GEO.LL-DER20-N_SHORT_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH20SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>0.00014591217041015625</y>
            <z>7.1505136489868164</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Implantium.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Bridge.GEO.LL-DER20-N_SHORT_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Bridge.GEO.LL-DER20-N_SHORT_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH2.0 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH20SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>-0.00042009353637695312</y>
            <z>10.86309814453125</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_IMPRO_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Bridge.GEO.LL-DER30-N_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Bridge.GEO.LL-DER30-N_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH3.0</DisplayInformation>
          <Keyword>BRIDGEGH30</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.0033299922943115234</y>
            <z>7.14989709854126</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Implantium.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Bridge.GEO.LL-DER30-N_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Bridge.GEO.LL-DER30-N_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH3.0 V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH30V2V3</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>2.25</x>
            <y>0.00052666664123535156</y>
            <z>10.863404273986816</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>SCANBODY_IMPRO_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Bridge.GEO.LL-DER30-N_SHORT_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Bridge.GEO.LL-DER30-N_SHORT_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH3.0 SHORT</DisplayInformation>
          <Keyword>BRIDGEGH30SHORT</Keyword>
        </ImplantSubtypeConfig>
        <ImplantSubtypeConfig>
          <RegistrationClickCenter>
            <x>1.75</x>
            <y>-0.00049734115600585938</y>
            <z>7.1489119529724121</z>
          </RegistrationClickCenter>
          <AxisAsymmetric>
            <x>1</x>
            <y>0</y>
            <z>0</z>
          </AxisAsymmetric>
          <MarkerFilename>ScanBody.Implantium.V3_EXOCAD.STL</MarkerFilename>
          <SupportFilename>Kolpak_TO.Implantium.Bridge.GEO.LL-DER30-N_SHORT_ExoCad.STL</SupportFilename>
          <InterfaceFilename>TO.Implantium.Bridge.GEO.LL-DER30-N_SHORT_ExoCad.STL</InterfaceFilename>
          <DisplayInformation>BRIDGE GH3.0 SHORT V2/V3</DisplayInformation>
          <Keyword>BRIDGEGH30SHORTV2V3</Keyword>
        </ImplantSubtypeConfig>
      </SubtypeConfig>
    </ImplantTypeConfig>
  </TypeConfig>
  <InfoSignature>Not yet signed</InfoSignature>
  <FileSignatures>
    <!--  NOTE! Signature is provided ONLY for specific mesh properties -->
    <!--  NOT for accuracy or suitability to a particular task.         -->
    <!--  A valid signature from the software vendor does NOT imply any -->
    <!--  warranties or statements regarding the data's correctness!    -->
    <FileSignature>
      <Filename />
      <Signature />
    </FileSignature>
  </FileSignatures>
</ImplantLibraryEntry>